Jiangsu Jinke Environmental Engineering Technology Co., Ltd.
Service Hotline:15950316088
Banner
You are here: Home > Industry knowledge > Content
company's product
Industry knowledge
Dust removal industrial filter bag daily proper maintenance and maintenance

Dust removal industrial filter bags are now widely used, and frequent daily use will always cause some wear and tear on the products. Jiangsu Jinke Environmental Engineering Technology Co., Ltd. teaches you how to properly maintain and maintain:

1. Regularly measure process parameters, such as smoke volume, temperature, concentration, etc., and find abnormalities, and find the cause and deal with it in time.
2. When starting up, first turn on the compressed air to the gas storage tank, turn on the control power, and start the ash discharge device. If there are other equipment in the system, start the downstream equipment first.
3. When the machine is stopped, after the process system is stopped, the dust collector and the exhaust fan should be kept working for a period of time. To collect the moisture and dust in the filter bag, it must be noted that the dust collector must be repeatedly used when the dust collector stops working. Clean the dust (can be manually cleaned) and remove the dust from the dust filter bag to prevent the bag from being affected by moisture.
4. When the dust filter bag is stopped, it is not necessary to cut off the compressed air source. Especially when the fan is working, it is necessary to supply compressed air to the lift valve cylinder to ensure that the poppet valve is open.
5. When the dust collector is in normal operation, the ash discharge device cannot stop working. Otherwise, the ash bucket will soon accumulate dust and overflow into the bag room, forcing the dust collector to stop working.

6. Mechanical moving parts such as reducer and ash conveying equipment should be oiled and oil changed according to the regulations. If abnormal phenomena are found, they should be eliminated in time.
7. The oil-water separator in the gas storage tank and gas source triple-piece should be drained once per shift. At the same time, the oil-water separator should be cleaned every 3 to 6 months. The oil mister should always check the oil storage condition and refuel in time.

Jiangsu Jinke Environmental Engineering Technology Co., Ltd. is one of the early units engaged in the research and development of filter materials, dust collectors and accessories and mass production and sales. Main: dust bag cage, stainless steel skeleton, industrial cloth bags, industrial filter bags, skeletons and other products. Strict industry standards and internal control processes are carried out from product design, production to sales to ensure product quality. New and old customers can purchase with confidence.

Address:No. 38, Zhenxing East Road, Banhu Industrial Park, Suining County, Yancheng City, Jiangsu Province  TelePhone:15950316088  MobilePhone:15950316088  E-mail:49362017@qq.com

Mobile