Making standards:

A. Cage dust removal stainless steel skeleton requires uniform distribution of support ring and longitudinal reinforcement, and should have sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtration and cleaning, which can prevent it from occurring during normal transportation and installation. Damage and deformation caused by collisions and impacts.

B. All the solder joints of the filter bag skeleton should be welded firmly, no desoldering, no soldering and no soldering are allowed.

C. The surface of the filter bag skeleton and the filter bag should be smooth and smooth, and no welding defects, unevenness and burrs are allowed.

D. The spring-loaded skeleton should have sufficient number of turns and elasticity, and the spacing should be even after the opening.

E. The surface of the filter bag skeleton must be treated with anti-corrosion treatment, and electroplated according to different needs. Spraying or painting, if used for high temperature, its anti-corrosion treatment should meet the requirements of use temperature.

F. The verticality of the dust bag cage is 6M plus or minus 1mm.

G. Dust bag cages have two sections or three sections in total.

H. Dust bag cage length of 3 meters or more wearing steel once formed literary tube.

J. Dust bag cage is galvanized, sprayed, and silicone treated.